WiFi Smart Light Bulb 15W RGB Dimmable LED Light Lamp for Alexa Google Home

Description

Features:
Control the bulbs individually, or group them together. Create individual moods for different rooms. Full control, at your finger tip.
Manage your light remotely by phone APP. It's applicable for both Android and Apple-IOS system. Enjoy the convenience of controlling your lights at any place by smartphone.
Personalize light through a color palette of over 16 million of color. You can control brightness and tones, and several scenes（static and dynamic）for choosing from: Night, Reading, Party, Being Colorful, Being Soft.
Wifi enabled
Sunrise sunset
Dimmable via app
86-265v 50 / 60HZ
1800lumens
Color :white 6500k and warm white 4500k
Instant bright light
E27 B22medium base
Work with Google assistant Alexa voice control
Specifications:
Name: 15W Smartphone Control Wifi Bulb
Light luminous flux: 1800 lumens
Color temperature: 6500Kwhite，4500k warm white,RGB+White,RGB+Warm White
Working voltage: AC100V - 264V 50/60Hz
Power:15W
Wprking temperature: - 25 degrees C - +55 degrees C
Effective life: 20000(H)
Bulb material: Milk white pmma
Package:
1*Wifi Smart Bulb
Software Installation
1. Download the app “ TechLife " from App Store or Google Play Store or Scan the QR code below
2. Turn on the bulb, run the app and register / login your"TechLife" account
3. Click "+" button on connect your WiFi bulb ( LEDnet****** ) to your WiFi router, Enjoy
How to restore the factory setting for the bulbs?
1. Power on the bulb
2. Wait 3-5 seconds and then power off the bulb.
3. At the end of the 4th time when you turn on the bulb, it will emit strobe for a few seconds. After that it will become fully bright at which point the reset is complete. Once you have reset the bulb, you should be able to see its wifi IP " LEDnet***** " again under your mobile device's wifi settings. ( if not, please restant your wifi, wait for a while and you will see it )
How to connect the bulb to Wi-Fi network?
1. Search for newest App "  TechLife " and Click "+" button on top right corner
2. Register/Login your Smart life
3. Go to your Wi-Fi settings on your moblie device.
4. Find the bulb's SSID " LEDnet****** " and connect to it. (If can not found, Reset your bulb, turn it on/off 4 times)
5. Open “TechLife” and connect device to Wi-Fi net work (choose your router and login your password, ensure the router is 2.4GHZ)
How to operate the bulb without router
The mobile device direct connect bulb of Wi-Fi " LEDnet****** " (If you can not find " LEDnet****** ", please try again after factory reset).
Notes:
1. Please allow 1-3mm error due to manual measurement. please make sure you do not mind before you bid
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item