Metron MP600 4160V Electric Fire Pump Controller 350 HP 1502-V4DBDA 1503F-E4GCD

Description

Green Industrial purchased this late model, medium voltage fire pump motor starter/controller from a project that was never completed.  This controller is as the factory delivered it.  This fire pump controller contains an Allen Bradley Cat# 1503F-E4GCD electric motor starter assembly with an Allen Bradley vacuum contactor Cat# 1502-V4DBDA-1. You can pull the Allen Bradley starter and use it in any application as needed or use the complete unit as intended!   New, never energized and ready to go to work!
Save thousands and buy NEW SURPLUS from Green Industrial today!
FOB: Belgium, WI 53004 USA
Description:
Brand: Metron
Model: MP600H-350-4160
Serial#: 23425511
Electrical Rating: 350 HP
Amps: 47
Volts: 4160
Phase: 3
Class: E2
BIL Rating: 60 kV
Control Input Voltage: 120 VAC
Maximum Operating Pressure: 300 PSI
UL Listed
FM Approved
YEAR: 2012
Allen Bradley Motor Starter (Inside Metron Enclosure)
CAT: 1503F-E4GCD
Allen Bradley Vacuum Contactor
Cat: 1502-V4DBDA-1
SER: E
Voltage: 2500-7200
Phase: 3
Amps: 400
Hertz: 50 / 60
Interrupting Capacity: 6000 Amp
Altitude Range: 0-1000 Meters
Description from Metron's website:
The Metron Series MP600 High Voltage Fire Pump Controllers are a modular concept system, which utilize “state-of-the-art” vacuum bottle technology. The primary control element in the MP600 is a fixed mount style vacuum bottle contactor with isolating disconnect switch. Integral to the disconnect switch are “R” rated current limiting cartridge style fuses. Space is provided for storage of three spare fuses on the rear of the outer door. Two fused potential/control transformers (PTs) are also contained within the cabinet. These transformers provide both input signals to the monitor circuits as well as control power for the MP600. For testing purposes, it is possible to supply 120VAC power directly to the control section through a built-in test receptacle and test switch. The MP600 has both front and rear access. Front access is for easy access to the control circuits. Rear access is provided for termination of the incoming power and termination of the motor connections. Incoming power and motor connections enter through the bottom of the controller enclosure. Locked rotor motor protection is provided by the microprocessor control unit per the requirements of NFPA 20, Chapter 10.The microprocessor control unit also provides contacts for remote alarm of phase reversal, low voltage, single phase, loss of voltage, motor tripped, and motor overload. The Operator Interface Device (OID) has LED lamps for Power On, Power Failure, System Failure, Motor Overload, and Motor Tripped. The OID also displays three phase voltage and current along with system water pressure.The standard MP600 is supplied in a NEMA type 2 enclosure which is fabricated from 12 gauge steel. Minimum floor clearance of 12 inches (304.8 mm) is provided with allowances for floor anchoring. The MP600 is protected with two hinged removable, gasketed doors, equipped with a 3-point latch, one door for the control section and one door for the high voltage section. Access to the vacuum contactor is provided by a lockable and interlocked second door, which requires the contactor to be disengaged from the bus prior to opening the door. Control wiring and components are accessible behind their own access door. Access to control components does not require motor de-energization. A solid copper ground bus is provided through the incoming high voltage and motor termination compartments.
Item No: MR1081
Terms & Conditions:
We would like to thank you for shopping with gibuys on eBay!  Please read all of our terms & conditions  before bidding / buying to ensure the best possible experience!  Please contact us with any questions.
*All products are advertised outside of eBay.  We reserve the right to sell all products outside of eBay for any reason*
Local Pickup:
We are located in Belgium, WI.  If you would like to schedule an appointment to inspect an item, or to pick it up, please contact us directly.  Please note that we must charge sales tax for a local pick up, unless you are tax exempt.  If you are tax exempt we require a copy of your tax exempt certificate before pick up.
Please contact us for payment methods available to pay upon pickup.
Shipping:
After you have purchased an Item on eBay please wait until we send over an updated invoice through eBay which reflects the correct shipping charges before paying as this will ensure that you are not over charged for shipping.
Shipping – Small Packages:
All listings with free shipping will be shipped via
UPS GROUND ONLY within the Continental United States
,
no exceptions.
PO Boxes are not an acceptable address form
unless
you are paying for shipping via USPS. If you enter a PO Box as your address we will contact you for your physical address. Please be advised that a delay in response will delay your shipping time.
If you would like a different method of shipping, would like us to use a different carrier, or need rush shipping please contact us and we will do our very best to meet your needs.  We do our very best to ship all items on the day the payment has cleared or the next business day.  If there is a delay in shipping your item we will contact you.  All items valued over 0.00 include delivery confirmation.
Please note that once a package has left our facility, we have absolutely no way of changing the delivery address.  If we need to reship the unit because it has been returned to us you will be responsible for the additional shipping charges.
Shipping – International:
Our preferred method of International Shipping is via USPS Express Mail International as it is the most cost effective, includes a tracking number, and includes insurance. If you would like us to use a different method of international shipping, please contact us and we will let you know the cost of the requested service.
UNDER NO CIRCUMSTANCE
will we ship via any method which does not include a tracking number and delivery confirmation or provide false information on customs forms.
Please note that items shipped outside of the United States may incur brokerage charges or customs fees.
As a customer you are responsible for these charges, as Green Industrial assumes no responsibility for the payment of these charges, nor do we have any way of calculating these charges.
Emergency / Expedited Services:
We understand that some of our customers need items fast because of an emergency after business hours.  We will do our very best to work with you to meet your demands. Please contact us
and we will respond as soon as possible with expedited solutions and costs.
Shipping – Freight:
Our preferred LTL Carriers are Dayton Freight, Old Dominion, and UPS Freight.
If you are interested in purchasing a larger item which requires freight, please contact us directly for the best freight price possible.  Please note that we quote you the exact price of freight and do not include any additional charges of any kind.  If you would like us to work with a different carrier, or you would like to arrange freight, please contact us and we will give you the pickup address, dimensions, and weight. Please note that items will not be shipped until the freight charges have been paid.
Payment Terms:
We will under no circumstance ship an item when payment has not cleared or the item has not yet been paid for.
All items
MUST
be paid for within 7 days. If an item is not paid for within 7 days we will open an unpaid item case through eBay to cancel the transaction.
We accept Paypal --
If you do not have a Paypal account, you can still check out with Paypal as a guest, however you will need to contact Paypal for instructions
.
We also accept all major credit cards through our online merchant authorize.net; however you must contact us directly and fill out a form to authorize our company to charge your credit card.
For local pick ups please contact us for payment methods available to pay upon pickup.
Pre-Purchase Inspection:
If you would like to arrange for a technician to come in and test a unit or inspect a unit before purchase, please contact us any time to make arrangements.
Return Policy:
Our goal at gibuys is to please our customers and we do our very best to describe each item accurately.  Please note that all units are sold in as-is condition with no warranties or guarantees. We offer a 30 day return policy from the date on the invoice on all items
UNLESS
otherwise noted within the listing.  With this return policy you have 30 days from the date of invoice to return the unit if it is found to be defective.  Please contact us directly to let us know you will be returning the defective unit. Once we receive the unit and have verified it is in the same condition as when we shipped it, we will either send you a replacement unit if we have one in stock or we will issue a refund for the unit price
only
back to the same method of payment.  All refunds will be for the price of the defective unit
ONLY
and do not include shipping charges.
Alterations or removal of any components off an item voids the 30-day return policy.
Please note that most of our equipment is in used condition, and we offer this 30 day return policy so you have the opportunity to test the unit and make sure it is the condition you expected.  Any claims for a defective item must be received by our company in writing prior to 30 days from the date of invoice.  NO EXCEPTIONS.
Please note that there are ABSOLUTELY NO RETURNS after 30 days  for any reason ---- NO EXCEPTIONS.
Problems?
We enjoy working with our customers to ensure that you have the best possible experience when purchasing from our eBay store.  If you have any questions, or any problems, we would be more than happy to work with you.  If you have a problem, we ask that you please contact us before leaving neutral or negative feedback on eBay so we have the opportunity to work out a solution together.  We sincerely value our customers and your 100% satisfaction is very important to us!